W4Pro TAC is the tactical version of W4Pro, It's a LEP flashlight that throws 3712 yards. The light intensity reaches 2,882,000 candela, 568 lumens. It uses a 21700 rechargeable lithium-ion battery, uses a customized LEP light source, and then passes through the lens reflection system to form a dazzling beam. By default, the high mode is turned on, half-press Momentary or full-press to lock and continue to work, even if Momentary is frequently used, it will not change modes, and it is always high;The hidden mode is strobe and low，In the off state, you can half-press 3 times to turn on the strobe, and you can switch to low.W4Pro TAC has almost no spill, suitable for field search, sea rescue, long-distance indication, etc. It is specially designed for special lighting.

Features:  

Material: Aluminum, black hard anodized

Reflective system: acrylic convex lens

Light source: special LEP module, wavelength 400-700nm, 6000-7000K, lifespan is about 10,000 hours

output:

Remarks: This test uses Weltool UB21-50 5000mAh 21700 rechargeable battery test, test environment: below 25 degrees Celsius, continuous lighting outdoors, (ambient temperature will affect runtime)

Battery: Use 1 21700 Li-ion rechargeable battery (included)

Switch: Tail button forward switch, 50,000 pressing life

High-efficiency drive circuit, no noise and no flicker

Temperature control protection: When the temperature of the flashlight is too high, the flashlight will automatically reduce the brightness to prevent overheating

with polarity protection

With low voltage prompt function

With battery over-discharge protection

304# stainless steel bezel, double-coated tempered glass lens

Passed the 1 meter drop test

Double O-ring waterproof, the protection level reaches IP67

Each flashlight has a unique serial number

Dimensions (±0.5mm): (Head diameter) 60.5mm, (Body diameter) 27mm, (Length) 198mm

Weight: 336±2g (without battery)

Included: UB21-50 lithium-ion battery, Type-C charging data cable, O-ring, stainless steel pocket clip

Instructions:

• First install the battery correctly

• Half-press the tail switch button once to turn on the high mode, release it to turn off, even if this operation is frequent, it will be high. At this time, press the switch hard to make a "click" sound to keep working continuously, and press the "click" again to turn off the flashlight.

• The hidden mode can be activated by half-pressing more than 3 consecutive times in the off state. When the hidden mode is turned on, the strobe is first. At this time, release the switch and then half-press it to switch to low immediately. Low and strobe can be switched in a cycle. Press the switch firmly to lock the strobe or low continuous operation; in the hidden mode, it will automatically exit the hidden mode and return to the high mode after shutting down for more than 1.5 seconds.When the battery power drops, the flashlight light will flash, please replace the battery in time.

• When the battery power is low, the main light of the flashlight will flash to remind you, please charge the battery in time.

• When the battery power is exhausted, the flashlight will automatically stop working.