Instructions
First unscrew the flashlight tail cap counterclockwise, install one high quality rechargeable 18650 Li-ion battery with the “+” end facing the head end of the flashlight, then tighten the tail cap clockwise.
T6 has a battery polarity protection function, even when you backwards installed the battery, the LED and electronics will not be damaged, and it just cannot be turned on. Please check the installation of battery.
A single fully press the pushbutton switch (until it clicks) to turn the light on/off at full intensity. During using, when the battery power drops, the flashlight goes flashing twice to remind you, even if you are focusing on the work, you will notice the flashing tips.
Please replace the battery when it flashes at the first time. The flashlight will still work for several minutes after the first flashing, leaving you enough time to replace battery.
The flashlight goes off after the second time flashes. Only allows one 3.7V rechargeable 18650 Li-ion battery! 3V CR123A Li-ion battery cannot be used!
Caution:
Please avoid shining flashlight directly into anyone's eyes, it will cause damage. Keep the battery away of children.
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov Click Here
Case Material: Anodized aerospace-grade aluminum construction
Reflector System: Deep-dish parabolic smooth reflector
Lamp Source: Features one powerful X - LED, 137LM/W peak
Beam intensity with a 50000 hours lifetime
Light Output: 330 lumens; 21322 candela; 292m beam distance; 2.5 runs hours
Battery: One rechargeable 18650 Li-ion battery (Not included)
ON/OFF: Multi-function push-button tail switch with a 50000 times lifespan
Lead-free PCB
Fully regulated output for consistent lumen performance over the battery life
Battery polarity protection
Lower voltage hint function
Over discharge protection
No low frequency flashing, and no noise of current
3mm (0.12”) thickened tempered glass lens
Machined aluminum O-ring sealed for lens protection
Non-slip knurled grip body
Durable and noiseless, rocky stipple texture for a sure grip
Terminal of body is conductive
Gold-coating conductive spring
1m (39.37”) impact resistance tested
Dual O-rings sealed, IPX7 waterproof to 1m (39.37”) for 30 minutes
Individually serialized for positive identification
Dimensions: Face cap diameter 32mm (1.26”), Body
Diameter 25.4mm (1”), Length 137mm (5.39”)
Weight: 119.5g (4.22 Oz) (without battery)
1*Lanyard, 1*spare O-ring included in the package
Copyright © Da Lian Guang Ming He Dian Mao Yi You Xian Gong Si (Dalian Gentlite Trade Co., Ltd.)
Mobile : +86 18641101028 E-mail:info@weltool.com
Tel:+86-411-84618462 Fax:+86-411-84618463
Address:Room 3&4, 24th Floor, No.69 Huili Street,Ganjingzi District,Dalian City,Liaoning Province,China